Breathe easy with the FA-400 bench top smoke absorber. The FA-400 removes soldering smoke and fumes quickly, safely and efficiently. The unit can be used in a vertical (standing up) position or low-profile position (laying down.) When used in the low-profile (laying down) position, efficiency and air flow increase by approximately 2.6 times.

Features

• Unit is made of non-sloughing static dissipative conductive material and operates quietly
• Standard activated carbon filter (PN: A1001) absorbs up to 80 percent of the odors from the air and is easy to replace
• Can be used vertically (upright) or horizontally/low profile (laying down)
• Uses existing 493 filters and accessories
• ESD-safe by design

Specifications:

• Power Consumption: 13W
• Absorption Capacity(w/o filter) Approx. 1.07m3;/min. (37.79 ft?3;/min.)
• Outer Dimensions:
• 169(W) x 213(H) x 112.5(D) mm
• (5.5(W) x 3.0(H) x 7.3(D) in.)
• Weight: 930g (2.1 lbs.)
• Activated-Carbon Filter
• Size : 130x130x10 mm (5.1 x 5.1 x 0.4 in.)
• Amount of Activated-Carbon filter: 12 g (0.03 lb.)
• Max. Absorbing weight of noxious components per filter: 4 g (0.01 lb.)

Maintenance:

The absorption force at the filter decreases gradually over time as the absorber is used. When the filter surface becomes completely white, the filter should be replaced.

Be careful that moisture, etc does not get on the filter.