Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects with Raspberry Pi, Arduino, or any other microcontroller board like the ESP32! This beefy relay power module is well designed and is great when you need to control more than one outlet at a time.

Important NOTE: This device has one always-on outlet which you can use to power the project which then controls the other 3 outlets.

Specifications

• A single input signal to switch four outlets: 1 always on + 1 normally on + 2 normally off.
• Universal control voltage 3-60VDC or 12-120VAC, or connect directly to a 12V, 48VDC, or even 120VAC circuit.
• Optical isolation, relay, hysteresis and de-bounce protection for added safety.
• A large MOV used to clamp surges for clean 90-140 VAC power.
• Durable SPDT control relay rated at:
• NC contact: 30A
• NO contact: 40A.
• More than 400k operations at 12A or 2million+ at 5A.
• A 12A thermal safety circuit breaker switch prevents overloads.
• Standard 19" C13 detachable cord included.
• Mounting tabs
• This power relay is professionally built and tested.
• Detachable cord: 480mm / 19" (+/- 1")
• Product Dimensions: 170.0mm x 95.0mm x 35.0mm / 6.7" x 3.7" x 1.4"
• Product Weight: 0.7g / 0.0oz

 Documentation

• Datasheet
• For technical information for this product please visit the Digital Loggers Support Page