This is the perfect chassis kit to get started in robots. The chassis features four gearmotors with four 65mm wheels. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and wheels and add 4 motor drivers and controller. This kit includes all of the parts needed to assemble the chassis as well as a 4xAA battery holder.

Please note that 4 gear motors require 4 motor drivers (H-bridges).  For a simpler first robot many prefer the Basic Chassis with gear motors and wheels.

Note: The chassis requires assembly (comes with instructions).  Wires and connectors must to soldered to the motors (wires and connectors not included).  The battery holder requires that a connector be soldered to the wires (connector not included).

Dimensions: 110 x 174mm

Features:

• 4 x gearmotors
• Optimum Motor Voltage: 4.5V
• Maximum Motor Voltage: 6.0V
• No Load Speed: 90rpm
• No Load Current: 190mA (max. 250mA)
• Stall Current: 1A
• Torque: 800gf.m
• 4 x 65mm wheels (30mm wide) plastic rims with rubber tires
• 2 x chassis plates (red) with a variety of mounting holes
• 1 x battery holder (holds 4xAA batteries)
• 1 x instruction sheet